Steady progress has continued over the past couple of weeks on the overhaul of our Brake Coach No.E43172
Electrical connection holders and end caps being painted |
Photo of the south west corner of the guard's compartment showing a rotten end gusset and rotten crash pillar/frame stanchion |
After cutting the rotten section of the crash pillar/stanchion, work started on the gusset whilst there was some extra room |
Cutting out the rotten section of the gusset |
Rotten sections replaced |
Cutting box section down to size to make new gusset bottoms, the next few photos show their backs being cut off, turned around, and welded back on |
One of two complete |
Starting the second |
Steve cutting out a gusset bottom |
Two centre gusset's with replacement bottoms welded in place |
Rotten patch on the south end |
Replacement metal cut to size |
Piece cut out |
Replacement put in place |
Welded in |
Welds dressed and the holes drilled for the lamp bracket |
Over on the north end Michael makes a start re-fitting the butterfly valve and other electrical connections |
Norman has made excellent painting progress with the second topcoat going on on the east side of the carriage |
No comments:
Post a Comment